FAQ

• 3/4/5 Port Solenoid Valves
• Fieldbus System/
  Serial Transmission System
• Air Cylinders
• Auto Switches
• Rotary Actuators
• Vacuum Equipment
• Air Dryers
• Regulators
• Modular F.R.L.
• Boosters
• Auto Drain
• Fittings
• Pressure Switches
• Flow Switches
• Process Valves
• Chemical Liquid Valves
  (Fluoropolymer Equipment)
• Temperature Control Equipment
• Electric Actuators

|Electric Actuators

When SVON signal is turned ON after applying power to the LECA6 controller, the actuator moved about 10mm. Why does it move?

Servo motor (24VDC) type actuators make a movement to check the Z-phase of the motor when the servo is first time powered. As this Z-phase signal is a signal sent once every time the motor was switched on, the motor rotates about 1 to 2 complete turns.
〔For example, LEFS25AA is an actuator with a lead of 12mm, it can move about 12-24mm.〕