FAQ
Support / Contact Us »
FAQ
|Electric Actuators
What kind of signals do LECA6/LECP6 send out during positioning operation?
There are two main output signals.
1).『OUT signal』→ when the DRIVE input is turned OFF, it sends out the step No. in operation or motion completed, but it is not synchronised with completion of motion. Please use it to check the step data in operation and completion of motion.
2).『INP signal』→ if the product reaches within the target positioning range, this signal is sent out. Use it to check the movement is completed in conjunction with the Busy output signal.
3).The BUSY signal is generated when there is motion.
