Site Map | Japanese | Chinese Corporate Site

WEB Catalog

Product Information » WEB Catalog » Vacuum Equipment (Vacuum Generators/Vacuum Suction Cups/Other) » Vacuum Pads (Vacuum Suction Cups)

My List My List Guide

Product List

Directional Control Valves
1. Pilot Operated 4/5 Port Solenoid Valves
2. Pilot Operated 3 Port Solenoid Valves
3. Direct Operated 3/4/5 Port Solenoid Valves
4. Reduced-wiring Fieldbus System (Serial Transmission System)
5. Air Operated Valves
6. Mechanical Valves/Transmitters
7. Finger Valve/Hand Valves/Residual Relief 3 Port Valve
8. Blow Guns
9. Power Valves
10. ISO Valves
11. Explosion-Proof Valves
Air Cylinders
1. Standard Air Cylinders (Round Type）
2. Standard Air Cylinders (Square Cover）
3. Compact Air Cylinders
4. Environment Resistant Cylinders
5. Floating Joints/Rod End
6. Air-hydro Units
7. Mechanically Jointed Rodless Cylinders
8. Magnetically Coupled Rodless Cylinders
9. Table Cylinders
10. Guide Cylinders (MG Series)
11. Guide Cylinders (CX Series)
12. Fine Lock Cylinders
13. Lock Cylinders/Cylinder with An End Lock
14. Specialty Cylinders
15. Clamp Cylinders
16. Pin Shift Cylinder
17. Stopper Cylinders
18. Stroke Reading Cylinders
19. Valve Mounted Air Cylinders
20. ISO Cylinders
21. Shock Absorbers
22. Auto Switches
23. Actuator Position Sensor
24. Cylinder Speed Checkers
Rotary Actuators/Air Grippers
1. Rotary Actuators Vane Type
2. Rotary Actuators Rack & Pinion Type
3. Parallel Type Air Grippers
4. Angular Type Air Grippers
5. Air Gripper Unit for Collaborative Robots
6. Auto Switches
Electric Actuators/Cylinders
1. Card Motor
2. Battery-less Absolute Encoder Type
3. Slider Type
4. Rod Type/Guide Rod Type
5. Slide Tables
6. Miniature
7. Rotary Tables
8. Grippers
9. Controllers/Drivers
10. Environment
11. Motorless Type
12. Electric Cylinders
13. Made to Order
Vacuum Equipment
1. Vacuum Ejectors (Vacuum Generators)/Vacuum Pump Systems
2. Vacuum Ejectors
3. Vacuum Release Valve Units
4. Air Suction Filters
5. Vacuum Pads (Vacuum Suction Cups)
6. Special Pads
7. Gripper Unit for Collaborative Robots
8. Vacuum Saving Valves
9. Vacuum Flow
10. Vacuum Regulators
11. Related Equipment for Vacuum Systems
Air Preparation Equipment
1. Aftercoolers/Air Tanks
2. Air Dryers
3. Air Preparation Filters
4. Auto Drains/Differential Pressure Gauges
Modular F.R.L. ⁄ Pressure Control Equipment
1. Modular F.R.L.
2. Regulators
3. Electro-Pneumatic Regulators
4. Proportional Valves
5. Booster Regulators
Lubrication Equipment
1. Lubrication Equipment
Fittings and Tubing
1. Fittings for General Purposes
2. Fittings for General Purposes(S Couplers/Multi-connectors)
3. Fittings for Special Environments
4. Fittings for Special Environments(Clean/Fluoropolymer)
5. Tubing
6. Tubing(Tubing for Special Environments)
7. Tubing(Fluoropolymer/Clean)
8. Related Products
Flow Control Equipment
Speed Controllers
1. Speed Controllers for General Purposes
2. Speed Controllers for Low Speed Control
3. Speed Controllers Special Environments
4. Speed Controllers with Special Functions
5. Tool Operation Type Speed Controllers
6. Air Saving Speed Controllers Air Saving Valves
7. Related Equipment
Silencers ⁄ Exhaust Cleaners ⁄ Blow Guns ⁄ Pressure Gauges
1. Silencers
2. Exhaust Cleaners
3. Blow Guns
4. Pressure Gauges
Switches ⁄ Sensors ⁄ Controller
1. Electronic Pressure Switches/Sensors (Self-contained Type)
2. Electronic Pressure Switches/Sensors (Remote Type)
3. Mechanical Pressure Switches
4. Electronic Flow Switches/Sensors
5. Mechanical Flow Switches
6. Controllers
Static Neutralization Equipment
1. Static Neutralization Equipment/Ionizers
Process Valves
1. 2/3 Port Solenoid Valves/Air Operated Valves
2. Compact 2/3 Port Solenoid Valves
3. 5.0 MPa 2/3 Port Solenoid Valves
4. 2/3 Port Valves for General Purpose Fluid Control
5. Coolant Valves
6. Valves for Water and Chemical Base Fluids
Chemical Liquid Valves ⁄ Fittings & Needle Valves ⁄ Tubing
1. Chemical Liquid Valves
2. Fittings/Needle Valves
3. Tubing
Process Pumps(Diaphragm Pumps)
1. Process Pumps
Temperature Control Equipment
1. Thermo-Chillers (Circulating Fluid Temperature Controllers)
2. Thermo-cons/Thermoelectric Baths (Peltier-Type Temperature Control Equipment)
3. Air Temperature Controllers
Process Gas Equipment
1. Process Gas Equipment
High Vacuum Equipment
1. High Vacuum Valves
2. Other
3. Slit Valves
4. Rodless Cylinders for Vacuum
Industrial Filters ⁄ Sintered Metal Elements
1. Industrial Filters
2. Sintered Metal Elements
Pneumatic Instrumentation Equipment
1. Positioners
2. Regulators
3. Relays/Valves
4. Electro-Pneumatic Transducers
5. Actuators
6. Detection Conversion Units
7. Solenoid Valves
8. Piping Materials
Hydraulic Equipment
1. Hydraulic Cylinders
2. Hydraulic Equipment

Subject ⁄ Industry Classified Products

Adobe Flash Player(v16 or later) is required to view the catalog.

Vacuum Pads (Vacuum Suction Cups)

Basic Vacuum Pad (Vacuum Suction Cup) ZP

・12 sizes, 6 types of pad forms
　The mounting bracket can be selected according to the application.
・Pad form: Flat type, Flat type with ribs, Bellows type,
　Thin flat type, Thin flat type with ribs, Deep type
・Mounting: Male thread, Female thread
・Vacuum inlet direction: Vertical, Lateral
・Vacuum inlet: Male thread, Female thread, One-touch fitting, Barb fitting
・Buffer: Without, With
　[Buffer stroke [mm]: 6, 10, 15, 20, 25, 30, 40, 50]

Data Download CAD PDF

Other Data	Safety Instructions　Vacuum Equipment/Precautions　Vacuum Pads/Precautions Series Variations/Model Selection　Mounting Bracket Assembly (p.121-130) Applicable Pad List/Adapter Buffe No.　Green Procurement (RoHS)

Series	Pad form	Pad diameter(mm)
ZP	Flat type	φ2,φ4,φ6,φ8,φ10,φ13,φ16, φ20,φ25,φ32,φ40,φ50
ZP	Flat type with ribs	φ10,φ13,φ16,φ20,φ25,φ32,φ40,φ50
ZP	Flat type (Ball joint)	φ10,φ13,φ16,φ20,φ25,φ32,φ40,φ50
ZP	Bellows type	φ6,φ8,φ10,φ13,φ16, φ20,φ25,φ32,φ40,φ50
ZP	Thin flat type	φ10,φ13,φ16
ZP	Thin flat type with ribs	φ10,φ13,φ16
ZP	Deep type	φ10,φ13,φ16,φ20,φ25,φ32,φ40

Basic Vacuum Pad (Vacuum Suction Cup)ZP

Series	Download
ZP
ZP
ZP
ZP
ZP
ZP
ZP

Compact Vacuum Pad (Vacuum Suction Cup) ZP3

	・Overall length shortened ・Pad form: Flat type, Flat type with groove, Bellows type, Bellows type with ribs ・Mounting: Male thread, Female thread ・Vacuum inlet direction: Vertical, Lateral ・Vacuum inlet: Male thread, Female thread, One-touch fitting, Barb fitting ・Buffer: Without, With 　[Buffer stroke [mm]: 3, 6, 10, 15, 20]

Data Download CAD PDF

Other Data	Safety Instructions　Vacuum Equipment/Precautions　Vacuum Pads/Precautions Series Variations/Model Selection　Mounting Bracket Assembly (p.162-164) Applicable Pad List/Adapter Buffe No.　Green Procurement (RoHS)

Series	Pad form	Pad diameter(mm)
ZP3	Flat type	φ1.5,φ2,φ3.5
ZP3	Flat type with groove	φ4,φ6,φ8,φ10,φ13,φ16
ZP3	Bellows type	φ4,φ6,φ8
ZP3	Bellows type with ribs	φ10,φ13,φ16

Compact Vacuum Pad (Vacuum Suction Cup)ZP3

Series	Download
ZP3
ZP3
ZP3
ZP3

Oval Vacuum Pad (Vacuum Suction Cup) ZP/ZP2

	・For rectangular, vertically long, and horizontally long workpieces ・Pad form: Oval flat type ・Mounting: Male thread, Female thread ・Vacuum inlet direction: Vertical, Lateral ・Vacuum inlet: Male thread, Female thread, One-touch fitting, Barb fitting ・Buffer: Without, With 　Buffer stroke (mm): [ZP] 6, 10, 15, 20, 25 　Buffer stroke (mm): [ZP2] 10, 20, 30, 40, 50

Data Download CAD PDF

Other Data	Safety Instructions　Vacuum Equipment/Precautions　Vacuum Pads/Precautions Series Variations/Model Selection　ZP: Mounting Bracket Assembly (p.189-194) ZP2: Mounting Bracket Assembly (p.195-197)　Applicable Pad List/Adapter Buffe No. Green Procurement (RoHS)

Series	Pad form	Pad diameter(mm)
ZP	Oval flat type	2×4, 3.5×7, 4×10
ZP2	Oval flat type	3.5×7, 4×10, 4×20, 4×30, 5×10, 5×20, 5×30, 6×10, 6×20, 6×30, 8×20, 8×30

Oval Vacuum Pad (Vacuum Suction Cup)ZP/ZP2

Series	Download
ZP
ZP2

High Rigidity Vacuum Pad (Vacuum Suction Cup) ZP3E

	・Stable suction position, Improved ease of removal ・Pad form: Flat type with groove, Bellows type with ribs and groove ・Mounting: Male thread, Female thread ・Vacuum inlet direction: Vertical, Lateral ・Vacuum inlet: Male thread, Female thread ・Buffer Without, With 　[Buffer stroke [mm]: 10, 30, 50]

Data Download CAD PDF

Other Data	Safety Instructions　Vacuum Equipment/Precautions　Vacuum Pads/Precautions Series Variations/Model Selection　Standard: Mounting Bracket Assembly (p.237-240) Ball Joint: Mounting Bracket Assembly (p.241-244)　Applicable Pad List/Adapter Buffe No. Green Procurement (RoHS)

Series	Pad form	Pad diameter(mm)
ZP3E	Flat type with groove	φ32,φ40,φ50,φ63,φ80,φ100,φ125
ZP3E	Flat type with groove (Ball joint type)	φ32,φ40,φ50,φ63,φ80,φ100,φ125
ZP3E	Bellows type with ribs and groove	φ32,φ40,φ50,φ63,φ80,φ100,φ125
ZP3E	Bellows type with ribs and groove (Ball joint)	φ32,φ40,φ50,φ63,φ80,φ100,φ125

High Rigidity Vacuum Pad (Vacuum Suction Cup)ZP3E

Series	Download
ZP3E
ZP3E
ZP3E
ZP3E

Mark-free Pad (Vacuum Suction Cup) ZP2

	・For use where adsorption marks must not be left on workpieces ・Pad which reduces the number of adsorption 　marks left on workpieces by the rubber

Data Download CAD PDF

Other Data	Safety Instructions　Vacuum Equipment/Precautions　Vacuum Pads/Precautions Series Variations/Model Selection　Standard: Mounting Bracket Assembly (p.121-130) High Rigidity: Mounting Bracket Assembly (p.255-263)　Applicable Pad List/Adapter Buffe No. Green Procurement (RoHS)

Series	Pad form	Pad diameter(mm)
ZP2	Flat type	φ4,φ6,φ8,φ10,φ13,φ16, φ20,φ25,φ32,φ40,φ50
ZP2	High rigidity (Flat type with ribs)	φ40,φ50,φ63,φ80,φ100,φ125
ZP2	Resin attachment	Applicable pad: φ6,φ8,φ10,φ13, φ16,φ20,φ25,φ32

Mark-free Pad (Vacuum Suction Cup)ZP2

Series	Download
ZP2
ZP2
ZP2

Vacuum Pad For Film Adsorption (Vacuum Suction Cup) ZP3P

	・Good for film packaging applications ・This product uses silicone rubber compliant with the FDA (USA Food 　and Drug Administration) regulation 21CFR§177.2600 for “Rubber 　articles intended for repeated use.” ・Blue colored pad ・Reduced leakage ・Reduction of wrinkles made on thin workpieces 　(film, vinyl, etc.) during adsorption

Data Download CAD PDF

Other Data	Safety Instructions　Vacuum Equipment/Precautions　Vacuum Pads/Precautions Series Variations/Model Selection　Applicable Pad List/Adapter Buffe No.　Green Procurement (RoHS)

Series	Pad form	Pad diameter(mm)
ZP3P	For film adsorption	φ20,φ25,φ35,φ50

Vacuum Pad For Film Adsorption (Vacuum Suction Cup)ZP3P

Series	Download
ZP3P

Vacuum Pad/Bellows Type (Vacuum Suction Cup) ZP3P-JT

・Adsorption transfer of workpiece with a soft film flexible packaging
・Thin film skirt and special shape rib
・Guide attachment function/5.5-stage
　Acceleration/deceleration: Adsorption transfer possible at 4G
・The pad and attachment are made of materials compliant with
　FDA (U.S. Food and Drug Administration) regulations as well as Food
　Sanitation Act standards.
・Blue colored pad
　Easy to distinguish the vacuum pad by color during contamination inspection

Data Download CAD PDF

Other Data	Safety Instructions　Vacuum Equipment/Precautions　Series Variations/Model Selection Green Procurement (RoHS)

Series	Pad form	Pad diameter(mm)
ZP3P-JT	Bellows (2.5-stage)	φ20,φ32,φ50
ZP3P-JT	Bellows (5.5-stage)	φ20,φ25,φ32,φ40,φ50

Vacuum Pad/Bellows Type (Vacuum Suction Cup)ZP3P-JT

Series	Download
ZP3P-JT
ZP3P-JT

4.5-Stage Bellows Pad (Vacuum Suction Cup) ZP2

	・For use where there is no space for a buffer (spring type) ・For workpieces with inclined adsorption surfaces

Data Download CAD PDF

Other Data	Safety Instructions　Vacuum Equipment/Precautions　Vacuum Pads/Precautions Series Variations/Model Selection　Applicable Pad List/Adapter Buffe No.　Green Procurement (RoHS)

Series	Pad form	Pad diameter(mm)
ZP2	Bellows (4.5-stage)	φ15,φ20,φ30,φ40,φ50
ZP2	Bellows (2.5-stage/3.5-stage)	φ6,φ9,φ10,φ14,φ15,φ16,φ25,φ30

4.5-Stage Bellows Pad (Vacuum Suction Cup)ZP2

Series	Download
ZP2
ZP2

Thin Flat/Flat Pad (Vacuum Suction Cup) ZP2

	・For the adsorption of flexible sheets or film ・Reduced deformation of flat surfaces during adsorption

Data Download CAD PDF

Other Data	Safety Instructions　Vacuum Equipment/Precautions　Vacuum Pads/Precautions Series Variations/Model Selection　Applicable Pad List/Adapter Buffe No.　Green Procurement (RoHS)

Series	Pad form	Pad diameter(mm)
ZP2	Thin flat type (With groove)	φ10,φ15,φ20,φ30

Thin Flat/Flat Pad (Vacuum Suction Cup)ZP2

Series	Download
ZP2

Compact/Short-type/Nozzle Pad (Vacuum Suction Cup) ZP2

	・For the adsorption of small components such as IC chips

Data Download CAD PDF

Other Data	Safety Instructions　Vacuum Equipment/Precautions　Series Variations/Model Selection Green Procurement (RoHS)

Series	Pad form	Pad diameter(mm)
ZP2	Nozzle type	φ0.8,φ1.1

Compact/Short-type/Nozzle Pad (Vacuum Suction Cup)ZP2

Series	Download
ZP2

Sponge Pad (Vacuum Suction Cup) ZP2

	・For the adsorption of workpieces with bumps

Data Download CAD PDF

Other Data	Safety Instructions　Vacuum Equipment/Precautions　Series Variations/Model Selection Green Procurement (RoHS)

Series	Pad form	Pad diameter(mm)
ZP2	Sponge	φ4,φ6,φ8,φ10,φ15

Sponge Pad (Vacuum Suction Cup)ZP2

Series	Download
ZP2

Special Configuration Pad (Vacuum Suction Cup) ZP2

	・For the adsorption of circular components like CDs and DVDs

Data Download CAD PDF

Other Data	Safety Instructions　Vacuum Equipment/Precautions　Vacuum Pads/Precautions Series Variations/Model Selection　Applicable Pad List/Adapter Buffe No.　Green Procurement (RoHS)

Series	Pad type	Pad diameter(mm)
ZP2	Vacuum pad for disk adsorption	−

Special Configuration Pad (Vacuum Suction Cup)ZP2

Series	Download
ZP2

Vacuum Pad for Panel Holding ZP2

	・For the adsorption and holding of the stage of panels, glass circuit boards, etc.

Data Download CAD PDF

Other Data	Safety Instructions　Vacuum Equipment/Precautions　Vacuum Pads/Precautions Series Variations/Model Selection　Applicable Pad List/Adapter Buffe No.　Green Procurement (RoHS)

Series	Pad type	Pad diameter(mm)
ZP2	Vacuum pad for panel holding	−

Vacuum Pad for Panel HoldingZP2

Series	Download
ZP2

Ball Spline Buffer Pad (Vacuum Suction Cup) ZP2

	・The ball spline guide is used for buffers.

Data Download CAD PDF

Other Data	Safety Instructions　Vacuum Equipment/Precautions　Vacuum Pads/Precautions Series Variations/Model Selection　Applicable Pad List/Adapter Buffe No.　Green Procurement (RoHS)

Series	Pad type	Pad diameter (mm)
ZP2	Pad with ball spline buffer	φ2，φ4，φ6，φ8

Ball Spline Buffer Pad (Vacuum Suction Cup)ZP2

Series	Download
ZP2

Vacuum Pad: Semiconductive Silicone Rubber ZP3-□HS□

	・Discharge static electricity gently. Prevent damage to electronic parts. ・Surface resistance: 10⁶ to 10⁹［Ω］・Pad form: Flat type with groove ・Mounting: Male thread, Female thread ・Vacuum inlet direction: Vertical, Lateral ・Vacuum inlet: Female thread, One-touch fitting, Barb fitting ・Buffer: Without, With 　[Buffer stroke [mm]: 3, 6, 10, 15, 20]

Data Download CAD PDF

Other Data	Safety Instructions　Vacuum Equipment/Precautions　Vacuum Pads/Precautions Series Variations/Model Selection　Mounting Bracket Assembly (p.162-164) Green Procurement (RoHS)

Series	Pad form	Pad diameter(mm)
ZP3-□HS□	Flat type with groove	φ4,φ6,φ8,φ10,φ13,φ16

Vacuum Pad: Semiconductive Silicone RubberZP3-□HS□

Series	Download
ZP3-□HS□

Vacuum Pad Made to Order ZP2

	・Blast-type pad (Compact pad, Short-type pad) 　Workpieces can be removed easily.

Data Download CAD PDF

Other Data	Safety Instructions　Vacuum Equipment/Precautions　Vacuum Pads/Precautions Series Variations/Model Selection　Compact/Thin Flat: Mounting Bracket Assembly (p.313) High Rigidity: Mounting Bracket Assembly (p.255-263)　Applicable Pad List/Adapter Buffe No. Green Procurement (RoHS)

Series	Pad form	Pad diameter (mm)
ZP2	Compact pad	φ3,φ4,φ5,φ6,φ7,φ8
ZP2	Short-type pad	φ2,φ3,φ3.5,φ4,φ5,φ6,φ8,φ10,φ15
ZP2	Thin flat pad	φ5,φ6,φ11,φ14,φ18,φ20
ZP2	Bellows pad	φ2,φ4,φ5,φ6,φ8,φ10,φ15,φ20
ZP/ZP2	High rigidity pad	φ32,φ40,φ50,φ63,φ80,φ100,φ125, φ150,φ250,φ300,φ340, 30×50

Vacuum Pad Made to OrderZP2

Series	Download
ZP2
ZP2
ZP2
ZP2
ZP/ZP2

Vacuum Pad with Ejector ZHP

	・Ejector and pad are integrated. Space saving with reduced piping labor! ・2-stage ejector 　Suction flow rate increased by 50%, Air consumption reduced by 30% ・Easier maintenance 　Mounting with the lock plate reduces the steps required for pad replacement! ・Pad diameter: ø63, ø80

Data Download CAD Manual PDF

Other Data	Safety Instructions　Vacuum Equipment/Precautions　Green Procurement (RoHS) Green Procurement (RoHS)

Series	Pad diameter	Pad form	Nozzle nominal size
ZHP	φ63, φ80	Bellows type with groove Flat type with groove	φ0.7, φ1.0, φ1.2, φ1.5

Vacuum Pad with EjectorZHP

Series	Download
ZHP

▲Page top