Site Map | Japanese | Chinese Corporate Site

WEB Catalog

Product Information » WEB Catalog » Rotary Actuators/Air Grippers » Rotary Actuators Vane Type

My List My List Guide

Product List

Directional Control Valves
1. Pilot Operated 4/5 Port Solenoid Valves
2. Pilot Operated 3 Port Solenoid Valves
3. Direct Operated 3/4/5 Port Solenoid Valves
4. Reduced-wiring Fieldbus System (Serial Transmission System)
5. Air Operated Valves
6. Mechanical Valves/Hand Valves
7. Power Valves
8. ISO Valves
9. Explosion-Proof Valves
Air Cylinders
1. Standard Air Cylinders (Round Type）
2. Standard Air Cylinders (Square Cover）
3. Compact Air Cylinders
4. Environment Resistant Cylinders
5. Floating Joints/Rod End
6. Air-hydro Units
7. Mechanically Jointed Rodless Cylinders
8. Magnetically Coupled Rodless Cylinders
9. Table Cylinders
10. Guide Cylinders (MG Series)
11. Guide Cylinders (CX Series)
12. Fine Lock Cylinders
13. Lock Cylinders/Cylinder with An End Lock
14. Specialty Cylinders
15. Clamp Cylinders
16. Pin Shift Cylinder
17. Stopper Cylinders
18. Stroke Reading Cylinders
19. Valve Mounted Air Cylinders
20. ISO Cylinders
21. Shock Absorbers
22. Auto Switches
23. Actuator Position Sensor
24. Cylinder Speed Checkers
Rotary Actuators/Air Grippers
1. Rotary Actuators Vane Type
2. Rotary Actuators Rack & Pinion Type
3. Parallel Type Air Grippers
4. Angular Type Air Grippers
5. Auto Switches
Electric Actuators/Cylinders
1. Card Motor
2. Slider Type
3. Rod Type/Guide Rod Type
4. Slide Tables
5. Miniature
6. Rotary Tables
7. Grippers
8. Controllers/Drivers
9. Environment
10. Motorless Type
11. Made to Order
12. Electric Cylinders
13. Moving Coil Actuators
Vacuum Equipment
1. Vacuum Ejectors (Vacuum Generators)/Vacuum Pump Systems
2. Vacuum Ejectors
3. Vacuum Release Valve Units
4. Air Suction Filters
5. Vacuum Pads (Vacuum Suction Cups)
6. Special Pads
7. Vacuum Saving Valves
8. Vacuum Flow
9. Vacuum Regulators
10. Related Equipment for Vacuum Systems
Air Preparation Equipment
1. Aftercoolers/Air Tanks
2. Air Dryers
3. Air Preparation Filters
4. Auto Drains/Differential Pressure Gauges
Modular F.R.L. ⁄ Pressure Control Equipment
1. Modular F.R.L.
2. Regulators
3. Electro-Pneumatic Regulators
4. Proportional Valves
5. Booster Regulators
Lubrication Equipment
1. Lubrication Equipment
Fittings and Tubing
1. Fittings for General Purposes
2. Fittings for General Purposes(S Couplers/Multi-connectors)
3. Fittings for Special Environments
4. Fittings for Special Environments(Clean/Fluoropolymer)
5. Tubing
6. Tubing(Tubing for Special Environments)
7. Tubing(Fluoropolymer/Clean)
8. Related Products
Flow Control Equipment
Speed Controllers
1. Speed Controllers for General Purposes
2. Speed Controllers for Low Speed Control
3. Speed Controllers Special Environments
4. Speed Controllers with Special Functions
5. Tool Operation Type Speed Controllers
6. Air Saving Speed Controllers Air Saving Valves
7. Related Equipment
Silencers ⁄ Exhaust Cleaners ⁄ Blow Guns ⁄ Pressure Gauges
1. Silencers
2. Exhaust Cleaners
3. Blow Guns
4. Pressure Gauges
Switches ⁄ Sensors ⁄ Controller
1. Electronic Pressure Switches/Sensors (Self-contained Type)
2. Electronic Pressure Switches/Sensors (Remote Type)
3. Mechanical Pressure Switches
4. Electronic Flow Switches/Sensors
5. Mechanical Flow Switches
6. Controllers
Static Neutralization Equipment
1. Static Neutralization Equipment/Ionizers
Process Valves
1. 2/3 Port Solenoid Valves/Air Operated Valves
2. Compact 2/3 Port Solenoid Valves
3. 5.0 MPa 2/3 Port Solenoid Valves
4. 2/3 Port Valves for General Purpose Fluid Control
5. Coolant Valves
6. Valves for Water and Chemical Base Fluids
Chemical Liquid Valves ⁄ Fittings & Needle Valves ⁄ Tubing
1. Chemical Liquid Valves
2. Fittings/Needle Valves
3. Tubing
Process Pumps(Diaphragm Pumps)
1. Process Pumps
Temperature Control Equipment
1. Thermo-Chillers (Circulating Fluid Temperature Controllers)
2. Thermo-cons/Thermoelectric Baths (Peltier-Type Temperature Control Equipment)
3. Air Temperature Controllers
Process Gas Equipment
1. Process Gas Equipment
High Vacuum Equipment
1. High Vacuum Valves
2. Slit Valves
3. Rodless Cylinders for Vacuum
Industrial Filters ⁄ Sintered Metal Elements
1. Industrial Filters
2. Sintered Metal Elements
Pneumatic Instrumentation Equipment
1. Positioners
2. Regulators
3. Relays/Valves
4. Electro-Pneumatic Transducers
5. Actuators
6. Detection Conversion Units
7. Solenoid Valves
8. Piping Materials
Hydraulic Equipment
1. Hydraulic Cylinders
2. Hydraulic Equipment

Subject ⁄ Industry Classified Products

Adobe Flash Player(v16 or later) is required to view the catalog.

Rotary Actuators Vane Type

Rotary Actuator CRB/CDRB

・Features a compact body with a built-in angle adjuster unit
　and auto switch unit (Size: 20, 30, 40)
　Overall length: 44% shorter, Weight: 48% lighter
・Piping, wiring, and angle adjustment can be performed on the same side
　for easier mounting.
・Easy-to-adjust start and end position with the angle adjustment bolts
　(adjustment as standard).
・Rotating angle can be easily checked using the chamfered position of
　the shaft. (Only for CDRB with auto switch)
・Each of the units below for the CRB2 series can be mounted to
　the new CRB series.

Data Download CAD Manual PDF

Other Data	Safety Instructions　Rotary Actuators/Precautions　Auto Switches/Precautions Rotary Actuators Series Variations/Model Selection　Quick Selection Table Green Procurement (RoHS)

Type	Series	Vane type	Size	Rotating angle
Standard (Without auto switch)	CRB	Single	10，15，20，30，40	90°180°
Standard (With auto switch)	CDRB	Single	10，15，20，30，40	90°180°
With vertical auto switch unit	CRB□-A	Single	10，15，20，30，40	90°180°
With angle adjustment unit	CRB□-B	Single	10，15，20，30，40	90°180°
With vertical auto switch unit With angle adjustment unit	CRB□-C	Single	10，15，20，30，40	90°180°

Rotary ActuatorCRB/CDRB

Type	Series	Download
Standard (Without auto switch)	CRB	dd
Standard (With auto switch)	CDRB	dd
With vertical auto switch unit	CRB□-A
With angle adjustment unit	CRB□-B
With vertical auto switch unit With angle adjustment unit	CRB□-C

Rotary Actuator CRB2/CDRB2

・It is possible to move the auto switch mounting position as desired.
・Direct mounting
・Connection port position: Select from side ported or axial ported
　(When a switch and angle adjuster are installed, only the side
　ported is selectable.)
・Low-pressure operation: 0.2 MPa (Size 10), 0.15 MPa (Sizes 15 to 40)
・It is possible to adjust the angle as desired.
・With auto switch (CDRB2 series: CDRB2□W, CDRB2□WU)

Data Download CAD PDF

Other Data	Safety Instructions　Rotary Actuators/Precautions　Auto Switches/Precautions Rotary Actuators Series Variations/Model Selection　Quick Selection Table Green Procurement (RoHS)

Type	Series	Vane type	Size	Rotating angle Single	Rotating angle Double
Standard	CRB2-Z	Single Double	10，15，20，30，40	90°180°270°	90°100°
With angle adjuster	CRB2□WU-Z	Single Double	10，15，20，30，40	90°180°270°	90°100°

Rotary ActuatorCRB2/CDRB2

Type	Series	Download
Standard	CRB2-Z
With angle adjuster	CRB2□WU-Z

Rotary Actuator/Free Mount Type CRBU2/CDRBU2

	・It is possible to change the starting position freely according to the 　installation conditions. ・Lightweight: Weight reduced by 12% ・Can be directly installed in 6 different ways ・It is possible to adjust the angle as desired. ・It is possible to set the auto switch mounting position freely. ・With auto switch (CDRBU2 series: CDRBU2, CDRBU2WU)

Data Download CAD PDF

Other Data	Safety Instructions　Rotary Actuators/Precautions Auto Switches/Precautions　Rotary Actuators Series Variations/Model Selection Green Procurement (RoHS)

Type	Series	Vane type	Size	Rotating angle Single	Rotating angle Double
Standard	CRBU2-Z	Single Double	10，15，20，30，40	90°180°270°	90°100°
With angle adjuster	CRBU2WU-Z	Single Double	10，15，20，30，40	90°180°270°	90°100°

Rotary Actuator/Free Mount TypeCRBU2/CDRBU2

Type	Series	Download
Standard	CRBU2-Z
With angle adjuster	CRBU2WU-Z

Rotary Actuator CRB1/CDRB1

	・Compact auto switches are mountable. (D-M9□) ・Stainless steel specification for main parts (Made to Order) ・Two different port locations (side and axial) are available. ・Mounting: Direct mounting, Foot mounting ・With auto switch (Series CDRB1: CDRB1, CDVRB1)

Data Download CAD Manual PDF

Other Data	Safety Instructions　Rotary Actuators/Precautions　Auto Switches/Precautions Rotary Actuators Series Variations/Model Selection　Quick Selection Table Green Procurement (RoHS)

Type	Series	Vane type	Size	Rotating angle Single	Rotating angle Double
Standard	CRB1	Single Double	50，63，80，100	90°100°180°190°270°280°	90°100°
With solenoid valve	CVRB1	Single Double	50，63，80，100	90°100°180°190°270°280°	90°100°

Rotary ActuatorCRB1/CDRB1

Type	Series	Download
Standard	CRB1	dd
With solenoid valve	CVRB1

Rotary Table MSU/MDSU

・Integrated table and rotary actuator
・Angle adjustable, ±5º at each rotation end (Double: ±2.5º)
・Table deflection accuracy: 0.03 mm or less (MSUA)
・Connection port position: Select from side ported or axial ported
　(When a switch is installed, only the side ported is selectable.)
・It is possible to move the auto switch mounting position as desired.
・With auto switch (MDSU series: MDSUA, MDSUB)

Data Download CAD Manual PDF

Other Data	Safety Instructions　Rotary Actuators/Precautions　Auto Switches/Precautions Rotary Actuators Series Variations/Model Selection　Quick Selection Table Green Procurement (RoHS)

Type	Series	Vane type	Size	Rotating angle Single	Rotating angle Double
High precision	MSUA	Single Double	1，3，7，20	90°180°	―
Basic type	MSUB	Single Double	1，3，7，20	90°180°	90°

Rotary TableMSU/MDSU

Type	Series	Download
High precision	MSUA	dd
Basic type	MSUB	dd

▲Page top