WEB Catalog

・High Precision: Rod end deflection of ±0.1 mm or less
・Position reproducibility
・Pins for positioning the workpiece provided by the customer
　can be directly mounted.
・Built-in coil scraper
・Reduces labor time by integrating the cylinder and guide
・Magnetic field resistant auto switches are mountable.

・High precision
　With rod extended: Deflection of ±0.1 mm or less
　Non-rotational accuracy: ±0.1 mm or less
・Positioning repeatability
　Positioning accuracy: ±0.05 mm, Distance accuracy: ±0.1 mm
・High output: Retract force: 1764 N, Extending force: 2362 N
・Mounting Based on NAAMS Standard (71 mm bore)

・Ideal for pin positioning and locating workpieces
・Highly accurate mounting positions
　Highly accurate positioning is possible even after
　the cylinder is replaced.
・D-P3DWA magnetic field resistant auto switch is available.
・Coil scraper is equipped as standard.

・With high rigidity offset load capacity
・High rigidity, High precision
　With plate extended: Deflection of ±0.1 mm or less
・3 different port location directions can be selected.
・Can be mounted from 2 directions
・Coil scrapers equipped as standard
・Auto switches are mountable.

・The workpiece contact portion of the locating pin can switch
　from center lock (for locating) to free (for releasing workpieces).
・Even if the workpiece is distorted after welding, if the locating pin is
　set to free, the workpiece can be removed easily from the locating pin.
・Locating pin swing angle and rotation angle: 3° ±1°

・Alignment and positioning of transferred workpieces
　Contributes to space saving on conveyor lines
・Table
　Max. allowable load weight: 1000 kg (MACM10)
　Workpieces can be moved in any direction: forward/backward,
　right/left, at an angle, and even rotated (360º).
　Ball bearings allow for smooth operation.
　Table centering accuracy ±1 mm or less (Workpiece not loaded)
　Table center movable range Max. ø100 mm (MACM10-50)