產品情報 »
產品目錄
» 開關/感測器/控制器
» 數位式壓力開關/感測器 (感測器・放大器分離型)
數位式壓力開關/感測器 (感測器・放大器分離型)
3畫面數位式顯示設定器 PSE300AC
| 系列 | 設定壓力範圍 | 適用壓力感測器 |
|---|---|---|
| PSE300AC | −0.2 ～ 2.1kPa 10 ～ −105kPa −105 ～ 105kPa −10 ～ 105kPa −50 ～ 525kPa −0.105 ～ 1.05MPa −0.105 ～ 2.1MPa −0.1 ～ 5.25MPa −0.1 ～ 10.5MPa | PSE550 PSE531/PSE541/PSE561 PSE533/PSE543/PSE563/PSE573 PSE532 PSE564/PSE574 PSE530/PSE540/PSE560/PSE570 PSE575 PSE576 PSE577 |
產品特點
■It is possible to change the settings while checking the measured value.
Visualization of Settings
The sub screen (label) shows the item to be set.
Easy Screen Switching
It is possible to change the settings while checking the measured value.
NPN/PNP Switch Function
Input Range Selection (for Pressure/Flow rate)
The sensor input range can be set to the required value and displayed. (Voltage input: 1 to 5 V/Current input: 4 to 20 mA) Pressure switch/Flow switch can be displayed.
Simple 3-Step Setting
When the S button is pressed and the set value (P_1) is being displayed, the set value (threshold value) can be set.
When the S button is pressed and the hysteresis (H_1) is being displayed, the hysteresis value can be set.
■Reduced Work-hours & Required Installation Space for Piping
■Pressure Sensor Variations
For General Fluids
Applicable Pressure Sensors
