WEB Catalog

Product Information »  WEB Catalog  » Lubrication Equipment » Lubrication Equipment

Lubrication Equipment

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Large Flow Lubricator AL

  • 2D/3D CAD

    The new SMC CAD SYSTEM, CADENAS, allows you to output 2D/3D CAD data with full part numbers in various data formats. Responses to part number selection has been greatly improved with the newly developed system.

    Click here for 2D/3D CAD
SeriesPort sizeBowl capacity (cm3)
AL800/9001 1/4,1 1/2,2440,1000

Auto Feed Lube, Auto Feed Tank ALF/ALT

    ・Reduces maintenance labor with an auto-lubrication function
SeriesTypePort sizeBowl capacity (cm3)
ALF400 to 9001/4,3/8,1/2,3/4,1
1 1/4,1 1/2,2
5000,9000
ALTTankAir:1/4 Oil:3/85000,9000
VA,VBOil distributorφ6Number of distribution ports:4,6,8,10,16

D.P. Lube ALD

    ・Centralized control of multi-point lubrication
    ・Less lubricant consumption
    ・Simplified oil feeding volume setting in which only the pressure differential is adjusted
    ・Oil can be replenished by merely opening and closing the oil filler plug without stopping the air line.
    ・Micromist generation can be checked from the oil filler port.
  • 2D/3D CAD

    The new SMC CAD SYSTEM, CADENAS, allows you to output 2D/3D CAD data with full part numbers in various data formats. Responses to part number selection has been greatly improved with the newly developed system.

    Click here for 2D/3D CAD
  • D.P. Lube ALD-E
    DoC
    Series Type View search result
    ALD600/900Single productView search result
    ALDU600/900UnitView search result
SeriesTypePort sizeBowl capacity (cm3)
ALD600/900Single product3/4,1,1 1/4,1 1/2,22000,5000
ALDU600/900Unit3/4,1,1 1/4,1 1/2,22000,5000

Booster Lube ALB

    ・Centralized control of multi-point lubrication
    ・Stable oil feeding with a micromist
    ・Through the use of a booster, a pressure that is higher than that of the main air passage can be supplied. This difference is used as the mist
     generating pressure differential. Thus, the pressure drop in the main air passage can be minimized.
    ・Micromist can be constantly supplied by merely adjusting the mist generating pressure differential.
    ・Oil can be replenished by merely opening and closing the oil filler plug without stopping the air line.
    ・Micromist generation can be checked from the oil filler port.
  • 2D/3D CAD

    The new SMC CAD SYSTEM, CADENAS, allows you to output 2D/3D CAD data with full part numbers in various data formats. Responses to part number selection has been greatly improved with the newly developed system.

    Click here for 2D/3D CAD
  • Booster Lube ALB-E
    DoC
    Series Type View search result
    ALB900Booster lubeView search result
    ALBA90Bypass lubrication adapterView search result
SeriesTypePort sizeBowl capacity (cm3)
ALB900Booster lube1,2,35000
ALBA90Bypass lubrication adapter1/4,1/2

Mist Spray Unit LMU

SeriesType
LMUMist spray unit
LMVMixing valve
LMHMagnet holder
LMDBranch pipe

Impulse Lubricator ALIP

    ・Supplies a set volume of oil just before the supply point
     It is possible to supply a constant volume of lubricating oil to circuits that are difficult for oil to reach, or to places with little air consumption.
  • 2D/3D CAD

    The new SMC CAD SYSTEM, CADENAS, allows you to output 2D/3D CAD data with full part numbers in various data formats. Responses to part number selection has been greatly improved with the newly developed system.

    Click here for 2D/3D CAD
SeriesTypePort sizeFeeding volume/cycle (cm3)
ALIPPressure type1/80 to 0.04
ALT10Oil tankAir:1/8
Oil:1/4
Tank capacity: 160 cm3
ALT20Oil tankAir:1/8
Oil:1/4
Tank capacity:1000 cm3

Liquid Collector/Exhaust Pressure Type AEP100

    ・Collect and reuse the leaked lubricating oil or hydraulic fluid using exhaust pressure.
    ・Collect the liquids using only the exhausted air released from the switching valve, Realizes energy saving
    ・Efficient operation that eliminates the need for collection and wiping by hand.
  • 2D/3D CAD

    The new SMC CAD SYSTEM, CADENAS, allows you to output 2D/3D CAD data with full part numbers in various data formats. Responses to part number selection has been greatly improved with the newly developed system.

    Click here for 2D/3D CAD

Liquid Collector/Ejector Type HEP500

    ・Collects the leakage of expensive cutting and grinding oil
    ・Eliminates the need to collect the leaked liquids by hand
    ・It is possible to use the equipped pump. A special driving force is not required.
  • 2D/3D CAD

    The new SMC CAD SYSTEM, CADENAS, allows you to output 2D/3D CAD data with full part numbers in various data formats. Responses to part number selection has been greatly improved with the newly developed system.

    Click here for 2D/3D CAD

Go Top