產品目錄

產品情報 »  產品目錄  » IO-Link對應產品  » IO-Link主機

IO-Link主機

串列傳輸系統 EX600

    輸入・ 輸出對應

    ∗依系列適用通訊協定不同
    　 詳細請參照WEB目錄
安全上的注意　3/4/5通口電磁閥/共通注意事項　現場總線系統 共通注意事項
產業IoT安全對策　現場總線用語集　系列組合變化/適用電磁閥系列
綠色對應 (RoHS)
系列保護構造通訊協定∗適用電磁閥
EX600IP67PROFIBUS DP
DeviceNet™
CC-Link
EtherNet/IP™
EtherCAT®
Ethernet PROFINET
Modbus/TCP (訂製品)
POWERLINK (訂製品)		SY3000，5000，7000 (插入式)
SV1000，2000，3000
VQC1000，2000，4000
S0700（IP40）

產品特點

■Compatible Protocols


■Series EX600 Configurations
■Connection using D-sub connector

These units are capable of connection using a D-sub connector. There are three types of units, for digital input, output, and input/output. The Digital Output Unit can be connected with an SMC manifold solenoid valve F kit (D-sub connector).

■Connection using spring type terminal block

These terminal block units are compatible with individual wiring configurations. There are three types of units, for digital input, output, and input/output. Wiring connection to a sensor connector box, etc., can be carried out easily using only a flat head screwdriver.

■Digital Input Unit

This Unit is for inputting a digital signal (ON/OFF signal). The signal of a 2-wire/3-wire auto switch attached to the actuator can be acquired to feedback a signal to the PLC. The control signal of an entire system can be managed by Fieldbus System.

■Analog Input/Output Unit

These units input or output analog (voltage/current) signals. A single unit performs both input and output, allowing feedback control where analog signals are received from a pressure sensor and sent to a pressure controller. Installation space is minimized as well.

■New Unit type added

Dual port SI Unit（EtherNet/IPTM）product

• Can be used for linear type or DLR type topology.
• Supports QuickConnectTM function.
• Status checks and settings can be performed on a web browser.

■Self Diagnosis Function
■Handheld Terminal
■Individual units can be connected and removed one by one.

A unique clamping method is adopted to prevent screws from falling out.
It is easy to separate the unit just by loosening bracket screws.

■Latest EtherNet/IPTM Technology

The following functions are available for the dual port EtherNet/IPTM product (EX600-SEN3/4).
・Added Compatible Topologies (connection configuration).


・QuickConnectTM Function Available

In the case of a tool changer, it takes about 10 seconds for the communication to be connected in common EtherNet/IPTM products, after the power of the device installed on the tool is turned ON. Since the QuickConnectTM function* is available in the EX600-SEN3/4, the communication can be connected in about 0.5 seconds.


・Built-in Web Server Function

The EX600-SEN3/4 has a built-in web server function, which enables status checks, parameter settings and forced output of the EX600 using general-purpose web browsers, such as Internet Explorer. Start-up of the system and maintenance can be performed efficiently.

Go Top