Product Information »
WEB Catalog
IN_PROD_346
» Silencers/Exhaust Cleaners/Blow Guns/Pressure Gauges » Blow Guns
Blow Guns
Blow Gun VMG
-
・A 20% reduction in power consumption can be achieved with the SMC “Blow gun” + “S coupler” + “Coil tube.”
・Pressure loss: 1% or less (Nozzle size: ø2.5)
・Available nozzles:
Male thread nozzle, High efficiency nozzle with male thread,
Low noise nozzle with male thread, Copper extension nozzle
・With flow rate adjustment function (-X54)
| Series | Port size | Operating pressure range （MPa） | Effective area （mm2） | Nozzle port size |
|---|---|---|---|---|
| VMG | Rc，NPT，G 1/4，3/8 | 0 to 1.0 | 30 | Rc1/4 |
Nozzles for Blowing KN
| Series | Type | Nozzle size |
|---|---|---|
| KN | Nozzle with male thread | φ1 to φ8 |
| KN | High efficiency nozzle | φ1 to φ2 |
| KN | Low noise nozzle with male thread | φ0.75×4 to φ1.1×8 |
| KN | Copper extension nozzle | φ1.5 to φ3 |
| KN | Pivoting nozzle | φ4，φ6 |
| KN | Nozzle with self-align fitting | φ1 to φ6 |
| KN | Nozzle for One-touch fitting | φ1 to φ3 |
Wide Angle Blow Nozzle IN-225
-
･ Capable of spraying a wide area with fluid
Spray angle: Approx. 100°
| Series | Type | Nozzle size |
|---|---|---|
| IN-225-1054 | Nozzle with male thread | φ6 equivalent |
| IN-225-1056 IN-225-1057 IN-225-1059 | Nozzle with self-align fitting | φ6 equivalent |
| IN-225-1104 | Pivot nozzle with male thread | φ6 equivalent |
Air Saving Impact Blow Gun IBG
-
・Increased impact force due to higher peak pressure
Drastic reduction in air consumption and labor time
・Application: It is capable of eliminating, in a short period of time, the dust, etc., that is difficult to remove with the existing blow gun.
・Long nozzle, Long nozzle with a silencer, Chip guard
・Compliant with OSHA Standards (U.S. Standards)
| Series | Fluid | Max. operating pressure | Operational force |
|---|---|---|---|
| IBG | Air | 0.7 MPa | 10 N or less |
Ionizer Gun IZG10
-
・Lightweight: Only 200 g (Body weight)
・Reduced operating force, Easy to hold grip
・Lighting LED
・Blow setting function
Select from continuous blow or pulse blow.
・Rapid static neutralization: 0.3 s (Distance: 150 mm, Operating pressure: 0.2 MPa)
Variations/Application Examples Antistatic Equipment Glossary
Safety Instructions Green Procurement (RoHS)
Safety Instructions Green Procurement (RoHS)
| Series | Ion generation method | Offset voltage (Ion balance) |
|---|---|---|
| IZG10 | Corona discharge type | Within ±10 V |
