SMC Video Library

・Actuator stroke position is output with an analog signal.
・Repeatability: 0.1 mm
・IO-Link compatible

• Details

・Applicable for the high-temperature environments
Ambient temperature : Max. 45℃
Inlet air temperature : Max. 65℃

• Details

・Applicable for the high-temperature environments of tropical regions
Ambient temperature : Max. 45℃
Inlet air temperature : Max. 65℃
Dew point range : 3℃ to 20℃
・Power supply voltage : Single-phase 230 VAC (50 Hz)

• Details

・Applicable for the high-temperature environments
Ambient temperature : Max. 45℃
Inlet air temperature : Max. 65℃
・Power supply voltage : Single-phase 230 VAC (50 Hz)

• Details

・Applicable for the high-temperature environments
Ambient temperature : Max. 113°F (45°C)
Inlet air temperature : Max. 149°F (65°C)
・Power supply voltage: Single-phase 230 VAC (60 Hz)

• Details

・Improved foreign matter resistance
・Increase in condensate discharge
Drain discharge: Max. 100 cm3/cycle
　(3 times that of the current model)
・Improved environmental resistance: Transparent bowl guard can protect the inner bowl

• Details

・Visualization of Settings
・Simple 3-Step Setting
・Easy Screen Switching
Setting is possible while checking the measured value.

• Details

・It is possible to change the settings while checking the measured value.
・IO-Link
・Angled display
Good visibility from various mounting positions

• Details

・Applicable fluid Air, N2
・Flow range: Max. 12000 L/min
・Flow ratio 100:1
Wide range of flow measurement with one product

• Details

・The controller and high-voltage power supply module can be mounted separately.
・Space saving: Height 37 mm x Width 30 mm
・One controller can control a maximum of 4 ionizers.

• Details

・Thinnest: 40 mm thick
・Fastest: Rapid static neutralization 0.5 seconds
・Offset voltage (Ion balance): ±5 V
・Stable static neutralization performance, Easier maintenance Series

• Details

・Life: 10 million cycles or more/10 times or more
・High peak pressure and low air consumption
Peak pressure: 15% increase
Air consumption: 35% reduction

• Details

・Operable without the need to remove the unit from the rack
・Front Access: Simple to control, service and maintain with all filters
and drainage via the front panel
・Space Saving: Multiple chillers can be mounted to a 19-inch rack.

• Details

・Weight reduced by up to 24% with a shorter guide rod and thinner plate.
・The space required between the bottom of the cylinder body and your equipment is reduced because of the shortening of the guide rod by a max. of 22 mm.

• Details

・The allowable moment of inertia is 3 times higher.
(The same as the heavy-duty MK2 series)
・It is possible to mount small auto switches on 4 surfaces.

• Details

・3-point-stopping is possible.
・Suitable for applications such as distributing workpieces to the left, right, and center.
・Can be operated with one valve

• Details

・Ejector and pad are integrated. Space saving with reduced piping labor!
・2-stage ejector
Suction flow rate increased by 50%, Air consumption reduced by 30%

• Details

・By supplying compressed air, large blow and vacuum flow rates are available.
・Large passage diameter available for the suction of machining chips, particles, etc.
・Maintenance-free

• Details

・Potential amplitude of 25 V or less with the dual AC type
(At an installation height of 300 mm)
・Rapid neutralization of static electricity by a feedback sensor
・Reduction of adjustment and maintenance labor by an auto balance sensor

• Details

・Push button type compact blow gun

・Compact plug type with an integrated BC element!