真空吸盘
真空吸盘/高刚性吸盘 ZP3E
-
・吸附姿势更稳定，脱离性提高
・吸盘形状：平型带沟、风琴型带肋/带沟
・安装连接：外螺纹、内螺纹
・真空引出方向：纵向、横向
・真空安装出口：外螺纹、内螺纹
・缓冲器：可选择带或不带缓冲器
［缓冲行程（mm）：10, 30, 50]
| 系列 | 吸盘形状 | 吸盘径（mm） |
|---|---|---|
| ZP3E | 平型带沟 | φ32、φ40、φ50、φ63、φ80、φ100、φ125 |
| ZP3E | 风琴型带沟 （头部可摆动） | φ32、φ40、φ50、φ63、φ80、φ100、φ125 |
| ZP3E | 风琴型 带肋/带沟 | φ32、φ40、φ50、φ63、φ80、φ100、φ125 |
| ZP3E | 风琴型 带肋/带沟 （头部可摆动） | φ32、φ40、φ50、φ63、φ80、φ100、φ125 |
产品特点
■Stability of suction position
Groove and rib formed to adsorb with entire surface
・Dents and bumps on the adsorption surface expands the area which is in contact with the workpiece.
・Ribs reduce the inclinations during transport of workpiece.
■Improved ease of removal
■The number of mounting screws reduced
■Can be disposed of separately.
The rubber pad and metal part can be separated.
■Mark-free
For use where adsorption marks must not be left on workpieces.
■Suction flow rate increased
Applicable to workpieces with a large suction flow rate and high permeability, and vacuum blow pumps with large suction flow rates.
■Ball joint type pad weight reduced
Weight reduced by changing the internal structure and materials.
■Direct mounting with male thread added
■Pad Unit Variations
■With Adapter Variations
