卡片电缸
卡片电缸®(zh) LAT3
-
・采用直线电机，使搬运、推送和长度测量系统小型化。
・厚度：9mm，质量：130g（行程10mm时）。
・最大推力：6N。
・重复定位精度：±5μm。
・推进测长精度：±10μm。
・最高使用频率：500cpm。
| 系列 | 行程（mm） | 传感器 （光学式直线 编码器）分辨率 | 推进 瞬时最大推力 | 重复 定位 精度 | 推进 测长 精度 | 最高速度 |
|---|---|---|---|---|---|---|
| LAT3F | 10, 20, 30, 50 | 1.25μm | ～6N | ±5μm | ±10μm | 400mm/s |
| LAT3M | 50 | 5μm | ～6N | ±20μm | ±40μm | 400mm/s |
| LAT3 | 10, 20, 30 | 30μm | ～6N | ±90μm | ±100μm | 400mm/s |
产品特点
・The transportation, pushing and length measurement systems have been miniaturized through the use of a linear motor.
・Maximum pushing
force: 6N
Pushing a miniature load
・Positioning repeatability:
± 5 μm
Positioning a workpiece
・Pushing measurement
accuracy: ± 10 μm
Parts measurement
・Maximum operating
frequency: 500 cpm
Rejection of non-conforming products, etc.
・0.5 kg → 1 kg
Just input 3 parameters:
Positioning time, Target
position, Load mass.
|How to Mount
Body Mounting
2 body mounting options
Workpiece Mounting
The table is provided with dowel pin holes for locating the workpiece as standard equipment.
Cable Mounting
The cable connector does not protrude above the actuator.
|Structure and Working Principle
|Start-up time is reduced greatly with a system that is ready-to-use and easy to set up.
The functions described below makes the start-up quick and easy.
Function for measuring and differentiation of workpieces
The size of the workpiece can be measured based
on the table stopping position by driving the table
until it comes into contact with the workpiece.
The workpieces can be differentiated
or checked for quality using parallel
output signals that correspond to
preset table position ranges.
Furthermore, using the multi-counter
makes it possible to display the table
position and output up to 31 preset
points.
|Application Examples
Examples of positioning applications
Sensor head movement and positioning
Component movement and positioning
Electronic component pick and place
Component supply to tape
Component separation (escapement)
Workpiece alignment
Examples of measurement applications
Measurement of workpiece height
Measurement of glass substrate thickness (multiple points)
Measurement of cable outside diameter
Measurement of tape thickness
Examples of high frequency actuation
Alignment of components on pallet by vibration
Distribution of workpieces
Examples of pushing applications
Pushing of workpieces (soft touch)
Positioning of workpieces
Cutting of resin mold component runners
Tape alignment
Switch inspection
High-density layout
