Port size IDG 50 L 02 Rc1/4 03 Rc3/8 Symbol Bore Size 04 Rc1/2 50 �� �� . 75 . �� �� 30 �� �� . 60 . �� �� 100 . �� �� 25A A 03 P Piping materials for low dew point air If air of a low dew point (.40°C or less) is required, do not use a nylon tube piping and resin fittings (except fluoropolymer) for the outlet side of the membrane air dryer. Due to the nature of the nylon tube, it could be affected by the ambient air, and it might not be possible to achieve the prescribed low dew point at the end of the tube. Therefore, for low dew point air, use a stainless steel or fluoropolymer piping. RoHS Single Unit /Standard Dew Point -40°C Specifications Series 25A-IDG Membrane Air Dryer How to Order Series compatible with secondary batteries Size 30 50 60 Flow rate by size L/min Outlet air flow rate (ANR) 75 110 170 75 240 100 300 Standard dew point temperature Symbol L Standard dew point (°C) -40 Accessory Symbol Nil B Note) When symbol B is indicated, a bracket assembly with a part number shown in the table left below is shipped together as an accessory, (but not assembled). Description None With bracket Fitting for purge air discharge Symbol P Contents With fitting for purge air discharge Semi-standard Symbol Nil R Contents None Flow direction (Right → Left) Bracket Assembly (Accessory) Part No. Part no. Applicable model 25A-BM64 25A-BM65 25A-IDG30LA, 50LA 25A-IDG60LA, 75LA, 100LA . Specifications for the 25A-series are the same as standard products. . With hexagon socket head bolts (2 pcs.) and spring washers (2 pcs.). 127