Inspection Diffusion CVD/Sputtering 4 Drying 5 p-n Layer Formation 6 Anti-Reflection Coating 15 Frame & Terminal Assembly 14 Inspection 10 Performance Test Curing Inspection 17 Performance Test 16 Module Transfer Module Transfer Frame Frame Terminal box Terminal box Cable Anti-reflection coating . + Sealant n-Layer p-Layer Blow dries the cells. Forms the n-Layer. Forms the anti-reflection coating on the surface of the silicon. Fits an aluminum frame around the module edged by a cutting machine and Curing hardens the sealant. installs a terminal box. Tests conductivity performance, etc. Tests output performance under artficial sunlight and checks pressure resistance and insulation. Transfers the modules. P.4 P.9 P.6 P.9 P.12 P.13 P.4 P.10 P.13 P.9 P.10 P.4 P.9 P.10 P.7 P.9 P.10 P.13 P.4 P.10 P.9 P.13 P.4 P.10 P.9 P.13 P.2 P.5 P.7 P.4 P.6 P.11 P.12 P.13 P.2 P.5 P.9 P.11 P.4 P.7 P.10 P.13 Vacuum-lift and transfer P.10 P.10 1 Clean 3 Temperature 1 Clean control 3 Temperature control 10 High vacuum 10 High vacuum 2 Actuators 4 Heat resistant 2 Actuators 7 Low vacuum 2 Actuators 7 Low vacuum 2 Actuators 7 Low vacuum 2 Actuators 2 Actuators 2 Actuators 6 Non-contact transfer 6 Non-contact transfer 4 Heat resistant 7 Low vacuum 7 Low vacuum 8 Static 7 Low vacuum electricity 8 Static electricity 9 Reduced wiring 9 Reduced wiring 9 Reduced wiring 9 Reduced wiring 9 Reduced wiring 12 Sensors (Detection) 12 Sensors (Detection) 12 Sensors (Detection) 12 Sensors (Detection) 12 Sensors (Detection) 11 Fluoropolymer 9 Reduced wiring 9 Reduced 11 Fluoropolymer wiring 12 Sensors (Detection) 12 Sensors (Detection) 5 Corrosion resistant 5 Corrosion resistant 5 Corrosion resistant Front matter 2