Series VM100/200 Specific Product Precautions 4 Be sure to read before handling. Refer to back cover for Safety Instructions and “Handling Precautions for SMC Products” (M-E03-3) for 3/4/5 Port Solenoid Valve Precautions. Series VM-X219 How to Mount Panel [Task 1] Removing the push button and fastening ring Remove them from the body turning them counterclockwise in the order of the push button and fastening ring. Fastening ring Push button [Task 2] Mounting the valve to the panel Insert the valve to the panel and fix it with a fastening ring. Remove three spacers attached to the valve depending on the panel thickness. Spacer Panel [Task 3] Mounting the push button Tighten the push button clockwise by hand and further tighten it until load is applied. Note) When the push button is not tightened enough, the valve may not output correctly after operating the push button. In other cases, the valve outputs temporarily, but when it is in the holding state, the valve may stop outputting. In this situation, tighten the push button again. 26