11 MHS3-X84 F Perpendicular electrical entry type L In-line electrical entry type L In-line electrical entry type L Perpendicular electrical entry type L Note 1) There is no protrusion for sections of the table with no values entered. Note 2) When mounted with lead wires on the finger side, be sure that attachments and workpieces, etc., do not touch switch units or lead wires. Note 3) The actual mounting position should be adjusted after confirming the auto switch performance. (mm) Protrusion of Auto Switch from Edge of Body The projection of an auto switch from the edge of the body is shown in the table below. Use the table as a guideline for mounting. Direction of auto switch mounting on air gripper Mounting with lead wire on side opposite the fingers Mounting with lead wire on same side as the fingers Lead wire type Air gripper model In-line entry Perpendicular entry In-line entry Perpendicular entry D-M9�ｮ D-M9�ｮW D-M9�ｮA D-M9�ｮV D-M9�ｮWV D-M9�ｮAV D-M9�ｮ D-M9�ｮW D-M9�ｮA D-M9�ｮV D-M9�ｮWV D-M9�ｮAV MHS3-16S-X84 Open . . . . 1 3 . 1 Closed . . . . . . . . MHS3-20S-X84 Open . . . . . . . . Closed . . . . . . . . MHS3-25S-X84 Open . . . . . 1 . . Closed . . . . . . . . MHS3-32S-X84 Open . . . . . . . . Closed . . . . . . . . MHS3-40S-X84 Open . . . . . . . . Closed . . . . . . . . MHS3-50S-X84 Open . . . . . . . . Closed . . . . . . . . MHS3-63S-X84 Open . . . . . . . . Closed . . . . . . . . MHS3-16C-X84 Open . . . . . . . . Closed 2.5 4.5 0.5 2.5 . . . . MHS3-20C-X84 Open . . . . . . . . Closed . 2 . . . . . . MHS3-25C-X84 Open . . . . . . . . Closed . . . . . . . . MHS3-32C-X84 Open . . . . . . . . Closed . 0.5 . . . . . . MHS3-40C-X84 Open . . . . . . . . Closed . 1 . . . . . . MHS3-50C-X84 Open . . . . . . . . Closed . . . . . . . . MHS3-63C-X84 Open . . . . . . . . Closed . . . . . . . . Auto switch model Finger position