Hook Air driver, etc. Window TKS Tube Socket adapter Series TKS Specific Product Precautions Be sure to read before handling. Refer to front matter 56 for Safety Instructions and pages 13 to 16 for Fittings and Tubing Precautions. Operation Caution 1. Insert the tube into the double layer tube stripper (Series TKS). Attachment to Tools Caution 1. Align the socket of the TKS with a commercially available male socket adapter (9.5 mm square). Operation Caution 1.When using a tool such as air driver, use a pushstart type which rotates after the tubing is inserted. 2. Do not insert the tube when the TKS is rotating, as the pawl may be damaged. 2. Connect the socket adapter to the TKS. 3. Connection with tools such as an air driver is also possible. Note) Ensure the TKS does not shake or vibrate. 2. Rotate the TKS in the arrow direction while pushing it. 3. Strip the outer layer until the cut end of the tubing strikes the end surface inside the stripper. The end surface can be confirmed in the window. Note) Stripping is not possible by rotating in the opposite direction. 4. Pull the TKS off of the tubing to complete stripping. The tube can be attached as it is to a FR One-touch fitting. 429 KQ2 KQB2 KS KX KM KF M H/DL L/LL KC KK KK130 DM KDM KB KR KA KQG2 KG KFG2 MS KKA KP LQ MQR T