Sleeve Socket 90° rotation Plug 90° rotation The plug is released. Socket Plug Sleeve 1 2 2 1 1 2 2 1 How to Operate Mounting With sleeve lock mechanism (Semi-standard) Releasing Mounting Releasing Pull out the sleeve straight in the direction of the arrow, and insert the plug straight into the socket. Insert the plug completely until it stops. After connection, pull it gently to check that the plug does not come off. Pull out the sleeve straight in the direction of the arrow. The plug is released. Make sure that the sleeve is in the released position and pull it out straight. Then, insert the plug straight into the socket. Insert the plug completely until it stops. After connection, pull it gently to check that the plug does not come off. Rotate the sleeve by 90 degrees in the direction of the arrow to match it to the locked position. Since detent is provided, the released position can be maintained. Rotate the sleeve by 90 degrees in the direction of the arrow from the locked position to release the lock. Since detent is provided, the released position can be maintained. Pull out the sleeve straight in the direction of the arrow. Released position (Possible to remove the plug) Locked position (Not possible to remove the plug) Note) Do not apply pressure when rotating the sleeve. If it is pressurized, the detent of the locked and released position may become unclear due to the pressure. Rotate the sleeve in the direction of the arrow. Series KK130 192