Supply oil plug Pressure differential adjustment valve Mist generation nozzle Oil tank 2 way valve IN OUT Pressure differential adjustment valve 2 way valve Supply oil plug Mist generation nozzle Oil tank IN OUT ALD600 ALD900 ALDU600 ALDU900 Main line filter Series AFF D.P. lube: Series ALD D.P. lube unit: Series ALDU Regulator Series AR Solenoid valve Metal seal Solenoid valve Rubber seal Regulator Series AR Strainer Series AF-X2230 Air dryer Series IDF Condition: Inlet pressure 0.5 MPa, Pressure differential setting flow 250 L/min (ANR) Piping Example Circuit Flow Characteristics (Representative value) Pressure Differential and Mist Generation (Representative value) Min. Flow for Pressure Differential Setting Air tool Air cylinder How to read the graph (Example) With the flow rate set to 250 L/min (ANR) and the pressure differential set to 0.05 MPa, by changing the flow rate to 3800 L/min (ANR) and 6000 L/min (ANR), the pressure differential will change from the initial 0.05 MPa to 0.06 MPa, and to 0.065 MPa. How to read the graph (Example) When the inlet pressure is 0.5 MPa, a flow rate that is greater than 102 L/min(ANR) will be necessary to set the pressure differential to 0.05 MPa. Below this flow rate, the pressure differential cannot be set to 0.05 MPa. Pressure differential (MPa) Flow rate (L/min (ANR)) Pressure differential (MPa) Mist generation (cm3/H) Flow rate ( L/min ( ANR)) Pressure differential (MPa) Flow rate (L/min (ANR)) Pressure differential (MPa) 0.5 MPa 0.9 MPa Inlet pressure 0.3 MPa 0.7 MPa D. P. Lube Series ALD600/900 IN OUT IN OUT 957 AL800 AL900 ALF ALT ALD ALB LMU ALIP AEP HEP